page 1 of 3 dc/dc converters TME series, 1 watt features single-in-line package (sip) i/o isolation 1000 vdc high effciency up to 80% operating temperature C40c to +85c industry standard pinout 100% burn-in (8 h) lead free design, rohs compliant 3-year product warranty the TME series is a range of sub-miniature, isolated dc/dc-converters in a sip- package, which requires only 0.7 cm 2 of board space. they provide a cost effective solution to generate supplementary, isolated voltages. full smd-design and a 100% production test of parameters ensure a high reliability of this product. ordercode input voltage output voltage output current max. effciency typ. TME 0303s 3.3 vdc 260 ma 74 % TME 0305s 3.3 vdc 10% 5.0 vdc 200 ma 77 % TME 0503s 3.3 vdc 260 ma 72 % TME 0505s 5 vdc 200 ma 69 % TME 0509s 5 vdc 10% 9 vdc 110 ma 76 % TME 0512s 12 vdc 84 ma 77 % TME 0515s 15 vdc 67 ma 78 % TME 1205s 5 vdc 200 ma 71 % TME 1209s 9 vdc 110 ma 77 % TME 1212s 12 vdc 10% 12 vdc 84 ma 79 % TME 1215s 15 vdc 67 ma 80 % TME 2405s 5 vdc 200 ma 70 % TME 2409s 9 vdc 110 ma 76 % TME 2412s 24 vdc 10% 12 vdc 84 ma 79 % TME 2415s 15 vdc 67 ma 79 % models http://www.tracopower.com
page 2 of 3 input specifications input current no load /full load 3.3 vin models: 35 ma / 370 ma typ. 5 vin models: 30 ma / 270 ma typ. 12 vin models: 13 ma / 110 ma typ. 24 vin models: 7 ma / 55 ma typ. surge voltage (1 s max.) 3.3 vin models: 6 v max. 5 vin models: 9 v max. 12 vin models: 18 v max. 24 vin models: 30 v max. reverse polarity input current 0.3 a max. reflected input ripple current can be reduced by ext. 1 C 3.3 f polyester film capacitor input filter internal capacitors output specifications voltage set accuracy 1 % typ. / 3 % max. regulation C input variation ( 1 % change of input voltage) 1.2 % typ. / 1.5 % max. C load variation (20 C 100 %) 4 to 14 % max. (depending on model) ripple and noise (20 mhz bandwidth) 150 mvp-p max. temperature coefficient 0.01 %/k typ. / 0.02 %/k max. short circuit protection limited 0.5 s max. capacitive load 33 f max. general specifications temperature ranges C operating C40c to +85c C case temperature +90c max. C storage C50c to +125c derating 5 vdc output models: 3.3 %/k above 70c other output models: 4.0 %/k above 75c humidity (non condensing) 95 % rel h max. reliability, calculated mttf (mil-hdbk-217f, @+25c ground benign) >2000000 h isolation voltage (60 sec.) input/output 1000 vdc isolation capacity input/output 60 pf typ. isolation resistance input/output >1000 mohm switching frequency 50 to 110 khz (frequency modulation) dc/dc converters TME series 1 watt http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
page 3 of 3 physical specifications casing material non conductive black plastic (ul 94-v0 rated) package weight 3.3 / 5.0 / 12 vin models 1.3 g (0.05 oz) 24 vin models 1.7 g (0.06 oz) soldering temperature max. 265c / 10 s outline dimensions mm (inches) bottom view 2.54 11.5 (0.45) 2 1 0.5 1.9 2.54 34 6.1 ( 0.24) 24 v models 4.2 (0.17) 5.2 (0.2) 7. 1 (0.28) 0 .25 (0.01) 0.5 (0.02) 3. 2 (0. 13) 0.5 (0.02) 2.54 1. 8 10.2 (0.4) (0.02) 0.5 (0.02) (0.1) (0.1) (0.1) (0.08 0.02 ) (0.07) 0.5 tolerances 0.25 (0.01) pin pich tolerance 0.13 (0.005) pins 0.05 (0.002) pin single 1 Cvin (gnd) 2 +vin (vcc) 3 Cvout 4 +vout pin-out dc/dc converters TME series 1 watt rev. december 13. 2017 sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com
|
